[Performance Evaluation of a New Microfluidic Platelet Function Test Platform].

OBJECTIVE: To evaluate the performance of a microfluidic platelet function test platform (MPFTP) previously established by our research group. METHODS: The effects of flow shear rate and storage time on platelet function test were analyzed taking the MPFTP as the object. The intra-assay variability of the MPFTP was evaluated. The function of platelet in peripheral venous blood from 24 healthy volunteers was assessed using the MPFTP and light transmission turbidity, either in the presence of 20 µmol/L acetylsalicylic acid (AS, an inhibitor of cyclooxygenase 1) or 50 µmol/L 5-phospho-2-methylthioadenosine (2-MeSAMP, a P2Y12 receptor inhibitor). The diagnostic performance of both methods in assaying platelet function inhibition by AS and 2-MeSAMP was analyzed by using receiver operating characteristic (ROC) curve. RESULTS: Under the flow shear rate of 1 500 s-1, our MPFTP could dynamically monitor platelet adhesion and aggregation, as well as quantify platelet function. Platelet aggregation increased with the increase of flow shear rate, while sample storage at room temperature for up to 5 h did not affect results of platelet function test. The intra-assay variability coefficient of variation of the MPFTP was <15%. The area under the curve of ROC showed that this platform had good diagnostic performance in the identification of platelet function inhibition by AS and 2-MeSAMP. CONCLUSION: This MPFTP shows good analytical performance for the assay of platelet function and can be developed into a new clinical platelet function test device in the future.

CsCCD2 Access Tunnel Design for a Broader Substrate Profile in Crocetin Production.

Crocetin, a high-value apocarotenoid in saffron, is widely applied to the fields of food and medicine. However, the existing method of obtaining crocetin through large-scale cultivation is far from meeting the market demand. Microbial synthesis of crocetin is a potential alternative to traditional resources, and it is found that carotenoid cleavage dioxygenase (CCD) is the critical enzyme to synthesize crocetin. So, in this study, we used "hybrid-tunnel" engineering to obtain variants of Crocus sativus-derived CsCCD2, essential for zeaxanthin conversion into crocetin, with a broader substrate specificity and higher catalytic efficiency. Variants including S323A, with a lower charge bias and a larger tunnel size than the wild-type, showed a 5-fold higher crocetin titer in yeast-based fermentations. S323A could also convert the ß-carotene substrate to crocetin dialdehyde and exhibited a 12.83-fold greater catalytic efficiency (kcat/Km) toward zeaxanthin than the wild-type in vitro. This strategy enabled the production of 107 mg/L crocetin in 5 L fed-batch fermentation, higher than that previously reported. Our findings demonstrate that engineering access tunnels to expand the substrate profile by in silico protein design represents a viable strategy to refine the catalytic properties of enzymes across a range of applications.

Compartmentalized Reconstitution of Post-squalene Pathway for 7-Dehydrocholesterol Overproduction in Saccharomyces cerevisiae.

7-Dehydrocholesterol (7-DHC) is the direct precursor to manufacture vitamin D3. Our previous study has achieved 7-DHC synthesis in Saccharomyces cerevisiae based on the endogenous post-squalene pathway. However, the distribution of post-squalene enzymes between the endoplasmic reticulum (ER) and lipid bodies (LD) might raise difficulties for ERG proteins to catalyze and deliver sterol intermediates, resulting in unbalanced metabolic flow and low product yield. Herein, we intended to rearrange the subcellular location of post-squalene enzymes to alleviate metabolic bottleneck and boost 7-DHC production. After identifying the location of DHCR24 (C-24 reductase, the only heterologous protein for 7-DHC biosynthesis) on ER, all the ER-located enzymes were grouped into four modules: ERG1/11/24, ERG25/26/27, ERG2/3, and DHCR24. These modules attempted to be overexpressed either on ER or on LDs. As a result, expression of LD-targeted DHCR24 and ER-located ERG1/11/24 could promote the conversion efficiency among the sterol intermediates to 7-DHC, while locating module ERG2/3 into LDs improved the whole metabolic flux of the post-squalene pathway. Coexpressing LD-targeted ERG2/3 and DHCR24 (generating strain SyBE_Sc01250035) improved 7-DHC production from 187.7 to 308.2 mg/L at shake-flask level. Further expressing ER-targeted module ERG1/11/24 in strain SyBE_Sc01250035 dramatically reduced squalene accumulation from 620.2 mg/L to the lowest level (by 93.8%) as well as improved 7-DHC production to the highest level (to 342.2 mg/L). Then targeting module ERG25/26/27 to LDs further increased 7-DHC titer to 360.6 mg/L, which is the highest shake-flask level production for 7-DHC ever reported. Our study not only proposes and further proves the concept of pathway compartmentalized reconstitution to regulate metabolic flux but also provides a promising chassis to produce other steroidal compounds through the post-squalene pathway.

Endogenous 2µ Plasmid Editing for Pathway Engineering in Saccharomyces cerevisiae.

In Saccharomyces cerevisiae, conventional 2µ-plasmid based plasmid (pC2µ, such as pRS425) have been widely adopted in pathway engineering for multi-copy overexpression of key genes. However, the loss of partition and copy number control elements of yeast endogenous 2µ plasmid (pE2µ) brings the issues concerning plasmid stability and copy number of pC2µ, especially in long-term fermentation. In this study, we developed a method based on CRISPR/Cas9 to edit pE2µ and built the pE2µ multi-copy system by insertion of the target DNA element and elimination of the original pE2µ plasmid. The resulting plasmid pE2µRAF1 and pE2µREP2 demonstrated higher copy number and slower loss rate than a pC2µ control plasmid pRS425RK, when carrying the same target gene. Then, moving the essential gene TPI1 (encoding triose phosphate isomerase) from chromosome to pE2µRAF1 could increase the plasmid viability to nearly 100% and further increase the plasmid copy number by 73.95%. The expression using pE2µ multi-copy system demonstrated much smaller cell-to-cell variation comparing with pC2µ multi-copy system. With auxotrophic complementation of TPI1, the resulting plasmid pE2µRT could undergo cultivation of 90 generations under non-selective conditions without loss. Applying pE2µ multi-copy system for dihydroartemisinic acid (DHAA) biosynthesis, the production of DHAA was increased to 620.9 mg/L at shake-flask level in non-selective rich medium. This titer was 4.73-fold of the strain constructed based on pC2µ due to the more stable pE2µ plasmid system and with higher plasmid copy number. This study provides an improved expression system in yeast, and set a promising platform to construct biosynthesis pathway for valuable products.

NVD-BM-mediated genetic biosensor triggers accumulation of 7-dehydrocholesterol and inhibits melanoma via Akt1/NF-ĸB signaling.

Aberrant activation of the cholesterol biosynthesis supports tumor cell growth. In recent years, significant progress has been made by targeting rate-limiting enzymes in cholesterol biosynthesis pathways to prevent carcinogenesis. However, precise mechanisms behind cholesterol degradation in cancer cells have not been comprehensively investigated. Here, we report that codon optimization of the orthologous cholesterol 7-desaturase, NVD-BM from Bombyx mori, significantly slowed melanoma cell proliferation and migration, and inhibited cancer cell engraftment in nude mice, by converting cholesterol to toxic 7-dehydrocholesterol. Based on these observations, we established a synthetic genetic circuit to induce melanoma cell regression by sensing tumor specific signals in melanoma cells. The dual-input signals, RELA proto-oncogene (RELA) and signal transducer and activator of transcription 1 (STAT1), activated NVD-BM expression and repressed melanoma cell proliferation and migration. Mechanically, we observed that NVD-BM decreased Akt1-ser473 phosphorylation and inhibited cytoplasmic RELA translocation. Taken together, NVD-BM was identified as a tumor suppressor in malignant melanoma, and we established a dual-input biosensor to promote cancer cell regression, via Akt1/NF-κB signaling. Our results demonstrate the potential therapeutic effects of cholesterol 7-desaturase in melanoma metabolism, and provides insights for genetic circuits targeting 7-dehydrocholesterol accumulation in tumors.

Exploring Catalysis Specificity of Phytoene Dehydrogenase CrtI in Carotenoid Synthesis.

Carotenoids, a variety of natural products, have significant pharmaceutical and commercial potential. Phytoene dehydrogenase (CrtI) is the rate-limit enzyme for carotenoid synthesis, whose catalysis specificity results in various carotenoids. However, the structural characteristics of CrtI for controlling the catalysis specificity on dehydrogenation steps are still unclear, which limited the development of CrtI function. Here we confirmed two mutation sites H136 and H453 in the mutant library of CrtI from Blakeslea trispora, which markedly regulated catalytic specificity. Interestingly, the sequence alignment features at H136 and H453 were consistent with the phylogenetic analysis of CrtI families. Subsequently, the functions of saturated mutants at H136 and H453 were clustered by principal component analysis (PCA) and k-means. According to the clustering results, diversiform mutants with specific dehydrogenation function provided important application value for carotenoid product customization. Meanwhile, this study also enriched the theory of enzyme evolution and guided the functional development of enzymes.

Metabolic Engineering of Saccharomyces cerevisiae for Enhanced Dihydroartemisinic Acid Production.

Direct bioproduction of DHAA (dihydroartemisinic acid) rather than AA (artemisinic acid), as suggested by previous work would decrease the cost of semi-biosynthesis artemisinin by eliminating the step of initial hydrogenation of AA. The major challenge in microbial production of DHAA is how to efficiently manipulate consecutive key enzymes ADH1 (artemisinic alcohol dehydrogenase), DBR2 [artemisinic aldehyde Δ11(13) reductase] and ALDH1 (aldehyde dehydrogenase) to redirect metabolic flux and elevate the ratio of DHAA to AA (artemisinic acid). Herein, DHAA biosynthesis was achieved in Saccharomyces cerevisiae by introducing a series of heterologous enzymes: ADS (amorpha-4,11-diene synthase), CYP71AV1 (amorphadiene oxidase), ADH1, DBR2 and ALDH1, obtaining initial DHAA/AA ratio at 2.53. The flux toward DHAA was enhanced by pairing fusion proteins DBR2-ADH1 and DBR2-ALDH1, leading to 1.75-fold increase in DHAA/AA ratio (to 6.97). Moreover, to promote the substrate preference of ALDH1 to dihydroartemisinic aldehyde (the intermediate for DHAA synthesis) over artemisinic aldehyde (the intermediate for AA synthesis), two rational engineering strategies, including downsizing the active pocket and enhancing the stability of enzyme/cofactor complex, were proposed to engineer ALDH1. It was found that the mutant H194R, which showed better stability of the enzyme/NAD+ complex, obtained the highest DHAA to AA ratio at 3.73 among all the mutations. Then the mutant H194R was incorporated into above rebuilt fusion proteins, resulting in the highest ratio of DHAA to AA (10.05). Subsequently, the highest DHAA reported titer of 1.70 g/L (DHAA/AA ratio of 9.84) was achieved through 5 L bioreactor fermentation. The study highlights the synergy of metabolic engineering and protein engineering in metabolic flux redirection to get the most efficient product to the chemical process, and simplified downstream conversion process.

Metabolic engineering of Saccharomyces cerevisiae for 7-dehydrocholesterol overproduction.

BACKGROUND: 7-Dehydrocholesterol (7-DHC) has attracted increasing attentions due to its great medical value and the enlarging market demand of its ultraviolet-catalyzed product vitamin D3. Microbial production of 7-DHC from simple carbon has been recognized as an attractive complement to the traditional sources. Even though our previous work realized 7-DHC biosynthesis in Saccharomyces cerevisiae, the current productivity of 7-DHC is still too low to satisfy the demand of following industrialization. As increasing the compatibility between heterologous pathway and host cell is crucial to realize microbial overproduction of natural products with complex structure and relative long pathway, in this study, combined efforts in tuning the heterologous Δ24-dehydrocholesterol reductase (DHCR24) and manipulating host cell were applied to promote 7-DHC accumulation. RESULTS: In order to decouple 7-DHC production with cell growth, inducible GAL promoters was employed to control 7-DHC synthesis. Meanwhile, the precursor pool was increased via overexpressing all the mevalonate (MVA) pathway genes (ERG10, ERG13, tHMG1, ERG12, ERG8, ERG19, IDI1, ERG20). Through screening DHCR24s from eleven tested sources, it was found that DHCR24 from Gallus gallus (Gg_DHCR24) achieved the highest 7-DHC production. Then 7-DHC accumulation was increased by 27.5% through stepwise fine-tuning the transcription level of Gg_DHCR24 in terms of altering its induction strategy, integration position, and the used promoter. By blocking the competitive path (ΔERG6) and supplementing another copy of Gg_DHCR24 in locus ERG6, 7-DHC accumulation was further enhanced by 1.07-fold. Afterward, 7-DHC production was improved by 48.3% (to 250.8 mg/L) by means of deleting NEM1 that was involved in lipids metabolism. Eventually, 7-DHC production reached to 1.07 g/L in 5-L bioreactor, which is the highest reported microbial titer as yet known. CONCLUSIONS: Combined engineering of the pathway and the host cell was adopted in this study to boost 7-DHC output in the yeast. 7-DHC titer was stepwise improved by 26.9-fold compared with the starting strain. This work not only opens large opportunities to realize downstream de novo synthesis of other steroids, but also highlights the importance of the combinatorial engineering of heterologous pathway and host to obtain microbial overproduction of many other natural products.

Heterozygous diploid and interspecies SCRaMbLEing.

SCRaMbLE (Synthetic Chromosome Rearrangement and Modification by LoxP-mediated Evolution) is a genome restructuring technique that can be used in synthetic genomes such as that of Sc2.0, the synthetic yeast genome, which contains hundreds to thousands of strategically positioned loxPsym sites. SCRaMbLE has been used to induce rearrangements in yeast strains harboring one or more synthetic chromosomes, as well as plasmid DNA in vitro and in vivo. Here we describe a collection of heterozygous diploid strains produced by mating haploid semisynthetic Sc2.0 strains to haploid native parental strains. We subsequently demonstrate that such heterozygous diploid strains are more robust to the effects of SCRaMbLE than haploid semisynthetic strains, rapidly improve rationally selected phenotypes in SCRaMbLEd heterozygous diploids, and establish that multiple sets of independent genomic rearrangements are able to lead to similar phenotype enhancements. Finally, we show that heterozygous diploid SCRaMbLE can also be carried out in interspecies hybrid strains.

In vitro DNA SCRaMbLE.

The power of synthetic biology has enabled the expression of heterologous pathways in cells, as well as genome-scale synthesis projects. The complexity of biological networks makes rational de novo design a grand challenge. Introducing features that confer genetic flexibility is a powerful strategy for downstream engineering. Here we develop an in vitro method of DNA library construction based on structural variation to accomplish this goal. The "in vitro SCRaMbLE system" uses Cre recombinase mixed in a test tube with purified DNA encoding multiple loxPsym sites. Using a ß-carotene pathway designed for expression in yeast as an example, we demonstrate top-down and bottom-up in vitro SCRaMbLE, enabling optimization of biosynthetic pathway flux via the rearrangement of relevant transcription units. We show that our system provides a straightforward way to correlate phenotype and genotype and is potentially amenable to biochemical optimization in ways that the in vivo system cannot achieve.

Rapid and Efficient CRISPR/Cas9-Based Mating-Type Switching of Saccharomyces cerevisiae.

Rapid and highly efficient mating-type switching of Saccharomyces cerevisiae enables a wide variety of genetic manipulations, such as the construction of strains, for instance, isogenic haploid pairs of both mating-types, diploids and polyploids. We used the CRISPR/Cas9 system to generate a double-strand break at the MAT locus and, in a single cotransformation, both haploid and diploid cells were switched to the specified mating-type at ∼80% efficiency. The mating-type of strains carrying either rod or ring chromosome III were switched, including those lacking HMLα and HMRa cryptic mating loci. Furthermore, we transplanted the synthetic yeast chromosome V to build a haploid polysynthetic chromosome strain by using this method together with an endoreduplication intercross strategy. The CRISPR/Cas9 mating-type switching method will be useful in building the complete synthetic yeast (Sc2.0) genome. Importantly, it is a generally useful method to build polyploids of a defined genotype and generally expedites strain construction, for example, in the construction of fully a/a/α/α isogenic tetraploids.

Identification and manipulation of a novel locus to improve cell tolerance to short-chain alcohols in Escherichia coli.

Escherichia coli KO11 is a popular ethanologenic strain, but is more sensitive to ethanol than other producers. Here, an ethanol-tolerant mutant EM was isolated from ultraviolet mutagenesis library of KO11. Comparative genomic analysis added by piecewise knockout strategy and complementation assay revealed EKO11_3023 (espA) within the 36.6-kb deletion from KO11 was the only locus responsible for ethanol sensitivity. Interestingly, when espA was deleted in strain W (the parent strain of KO11), ethanol tolerance was dramatically elevated to the level of espA-free hosts [e.g., MG1655 and BL21(DE3)]. And overexpression of espA in strains MG1655 and BL21(DE3) led to significantly enhanced ethanol sensitivity. In addition to ethanol, deletion of espA also improved cell tolerance to other short-chain (C2-C4) alcohols, including methanol, isopropanol, n-butanol, isobutanol and 2-butanol. Therefore, espA was responsible for short-chain alcohol sensitivity of W-strains compared to other cells, which provides a potential engineering target for alcohols production.

Engineering Saccharomyces cerevisiae for geranylgeraniol overproduction by combinatorial design.

Combinatorial design is an effective strategy to acquire the optimal solution in complex systems. In this study, the combined effects of pathway combination, promoters' strength fine-tuning, copy numbers and integration locus variations caused by δ-integration were explored in Saccharomyces cerevisiae using geranylgeraniol (GGOH) production as an example. Two GGOH biosynthetic pathway branches were constructed. In branch 1, GGOH was converted from isopentenyl pyrophosphate (IPP) and farnesyl diphosphate (FPP). In branch 2, GGOH was derived directly from IPP and dimethylallyl pyrophosphate (DMAPP). Regulated by 10 combinations of 11 diverse promoters, a fusion gene BTS1-ERG20, a heterologous geranylgeranyl diphosphate synthase from Sulfolobus acidocaldarius (GGPPSsa) and an endogenous N-terminal truncated gene 3-hydroxyl-3-methylglutaryl-CoA reductase isoenzyme 1 (tHMGR), were incorporated into yeast by δ-integration, leading to a series of GGOH producing strains with yields ranging from 18.45 mg/L to 161.82 mg/L. The yield was further increased to 437.52 mg/L by optimizing the fermentation medium. Consequently, the GGOH yield reached 1315.44 mg/L in a 5-L fermenter under carbon restriction strategy. Our study not only opens large opportunities for downstream diterpenes overproductions, but also demonstrates that pathway optimization based on combinatorial design is a promising strategy to engineer microbes for overproducing natural products with complex structure.

Chassis and key enzymes engineering for monoterpenes production.

Microbial production of monoterpenes is often limited by their cytotoxicity and in vivo conversion. Therefore, alleviating cytotoxicity and reducing conversion by chassis engineering are highly desirable. On the other hand, engineering key enzymes is also critical for improving monoterpenes production through facilitating the biosynthesis process. Here we critically review recent advances in cytotoxicity alleviation, reducing in vivo conversion, selecting geranyl diphosphate synthase and engineering monoterpene synthases. These achievements would lead to the development of superior chassis with improved tolerance to cytotoxicity and rationally tailored metabolites profiles to improve titer, yield and productivity for the production of monoterpenes by microbial cells.

Manipulation of GES and ERG20 for geraniol overproduction in Saccharomyces cerevisiae.

Manipulation of monoterpene synthases to maximize flux towards targeted products from GPP (geranyl diphosphate) is the main challenge for heterologous monoterpene overproduction, in addition to cell toxicity from compounds themselves. In our study, by manipulation of the key enzymes geraniol synthase (GES) and farnesyl diphosphate synthase (Erg20), geraniol (a valuable acyclic monoterpene alcohol) overproduction was achieved in Saccharomyces cerevisiae with truncated 3-hydroxy-3-methylglutaryl-coenzyme reductase (tHMGR) and isopentenyl diphosphate isomerase (IDI1) overexpressed. The expressions of all above engineered genes were under the control of Gal promoter for alleviating product toxicity. Geraniol production varied from trace amount to 43.19mg/L (CrGES, GES from Catharanthus roseus) by screening of nine GESs from diverse species. Further through protein structure analysis and site-directed mutation in CrGES, it was firstly demonstrated that among the high-conserved amino acid residues located in active pocket, Y436 and D501 with strong affinity to diphosphate function group, were critical for the dephosphorylation (the core step for geraniol formation). Moreover, the truncation position of the transit peptide from the N-terminus of CrGES was found to influence protein expression and activity significantly, obtaining a titer of 191.61mg/L geraniol in strain with CrGES truncated at S43 (t3CrGES). Furthermore, directed by surface electrostatics distribution of t3CrGES and Erg20WW (Erg20F96W-N127W), co-expression of the reverse fusion of Erg20ww/t3CrGES and another copy of Erg20WW promoted the geraniol titer to 523.96mg/L at shakes flask level, due to enhancing GPP accessibility led by protein interaction of t3CrGES-Erg20WW and the free Erg20WW. Eventually, a highest reported titer of 1.68g/L geraniol in eukaryote cells was achieved in 2.0L fed-batch fermentation under carbon restriction strategy. Our research opens large opportunities for other microbial production of monoterpenes. It also sets a good reference for desired compounds overproduction in microorganisms in terms of manipulation of key enzymes by protein engineering and metabolic engineering.

Bug mapping and fitness testing of chemically synthesized chromosome X.

Debugging a genome sequence is imperative for successfully building a synthetic genome. As part of the effort to build a designer eukaryotic genome, yeast synthetic chromosome X (synX), designed as 707,459 base pairs, was synthesized chemically. SynX exhibited good fitness under a wide variety of conditions. A highly efficient mapping strategy called pooled PCRTag mapping (PoPM), which can be generalized to any watermarked synthetic chromosome, was developed to identify genetic alterations that affect cell fitness ("bugs"). A series of bugs were corrected that included a large region bearing complex amplifications, a growth defect mapping to a recoded sequence in FIP1, and a loxPsym site affecting promoter function of ATP2 PoPM is a powerful tool for synthetic yeast genome debugging and an efficient strategy for phenotype-genotype mapping.

Heterologous biosynthesis and manipulation of alkanes in Escherichia coli.

Biosynthesis of alkanes in microbial foundries offers a sustainable and green supplement to traditional fossil fuels. The dynamic equilibrium of fatty aldehydes, key intermediates, played a critical role in microbial alkanes production, due to the poor catalytic capability of aldehyde deformylating oxygenase (ADO). In our study, exploration of competitive pathway together with multi-modular optimization was utilized to improve fatty aldehydes balance and consequently enhance alkanes formation in Escherichia coli. Endogenous fatty alcohol formation was supposed to be competitive with alkane production, since both of the two routes consumed the same intermediate-fatty aldehyde. Nevertheless, in our case, alkanes production in E. coli was enhanced from trace amount to 58.8mg/L by the facilitation of moderate fatty alcohol biosynthesis, which was validated by deletion of endogenous aldehyde reductase (AHR), overexpression of fatty alcohol oxidase (FAO) and consequent transcriptional assay of aar, ado and adhP genes. Moreover, alkanes production was further improved to 81.8mg/L, 86.6mg/L or 101.7mg/L by manipulation of fatty acid biosynthesis, lipids degradation or electron transfer system modules, which directly referenced to fatty aldehydes dynamic pools. A titer of 1.31g/L alkanes was achieved in 2.5L fed-batch fermentation, which was the highest reported titer in E. coli. Our research has offered a reference for chemical overproduction in microbial cell factories facilitated by exploring competitive pathway.

Engineering Yarrowia lipolytica for Campesterol Overproduction.

Campesterol is an important precursor for many sterol drugs, e.g. progesterone and hydrocortisone. In order to produce campesterol in Yarrowia lipolytica, C-22 desaturase encoding gene ERG5 was disrupted and the heterologous 7-dehydrocholesterol reductase (DHCR7) encoding gene was constitutively expressed. The codon-optimized DHCR7 from Rallus norvegicus, Oryza saliva and Xenapus laevis were explored and the strain with the gene DHCR7 from X. laevis achieved the highest titer of campesterol due to D409 in substrate binding sites. In presence of glucose as the carbon source, higher biomass conversion yield and product yield were achieved in shake flask compared to that using glycerol and sunflower seed oil. Nevertheless, better cell growth rate was observed in medium with sunflower seed oil as the sole carbon source. Through high cell density fed-batch fermentation under carbon source restriction strategy, a titer of 453±24.7 mg/L campesterol was achieved with sunflower seed oil as the carbon source, which is the highest reported microbial titer known. Our study has greatly enhanced campesterol accumulation in Y. lipolytica, providing new insight into producing complex and desired molecules in microbes.

Alleviating Redox Imbalance Enhances 7-Dehydrocholesterol Production in Engineered Saccharomyces cerevisiae.

Maintaining redox balance is critical for the production of heterologous secondary metabolites, whereas on various occasions the native cofactor balance does not match the needs in engineered microorganisms. In this study, 7-dehydrocholesterol (7-DHC, a crucial precursor of vitamin D3) biosynthesis pathway was constructed in Saccharomyces cerevisiae BY4742 with endogenous ergosterol synthesis pathway blocked by knocking out the erg5 gene (encoding C-22 desaturase). The deletion of erg5 led to redox imbalance with higher ratio of cytosolic free NADH/NAD+ and more glycerol and ethanol accumulation. To alleviate the redox imbalance, a water-forming NADH oxidase (NOX) and an alternative oxidase (AOX1) were employed in our system based on cofactor regeneration strategy. Consequently, the production of 7-dehydrocholesterol was increased by 74.4% in shake flask culture. In the meanwhile, the ratio of free NADH/NAD+ and the concentration of glycerol and ethanol were reduced by 78.0%, 50.7% and 7.9% respectively. In a 5-L bioreactor, the optimal production of 7-DHC reached 44.49(±9.63) mg/L. This study provides a reference to increase the production of some desired compounds that are restricted by redox imbalance.

Biosynthesis of odd-chain fatty alcohols in Escherichia coli.

Engineered microbes offer the opportunity to design and implement artificial molecular pathways for renewable production of tailored chemical commodities. Targeted biosynthesis of odd-chain fatty alcohols is very challenging in microbe, due to the specificity of fatty acids synthase for two-carbon unit elongation. Here, we developed a novel strategy to directly tailor carbon number in fatty aldehydes formation step by incorporating α-dioxygenase (αDOX) from Oryza sativa (rice) into Escherichia coli αDOX oxidizes Cn fatty acids (even-chain) to form Cn-1 fatty aldehydes (odd-chain). Through combining αDOX with fatty acyl-acyl carrier protein (-ACP) thioesterase (TE) and aldehyde reductase (AHR), the medium odd-chain fatty alcohols profile (C11, C13, C15) was firstly established in E. coli. Also, medium even-chain alkanes (C12, C14) were obtained by substitution of AHR to aldehyde decarbonylase (AD). The titer of odd-chain fatty alcohols was improved from 7.4mg/L to 101.5mg/L in tube cultivation by means of fine-tuning endogenous fatty acyl-ACP TE (TesA'), αDOX, AHRs and the genes involved in fatty acids metabolism pathway. Through high cell density fed-batch fermentation, a titer of 1.95g/L odd-chain fatty alcohols was achieved, which was the highest reported titer in E. coli. Our system has greatly expanded the current microbial fatty alcohols profile that provides a new brand solution for producing complex and desired molecules in microbes.